久久久精品人妻一区亚美研究所,亚洲日产菠萝蜜,狠狠色色综合站,亚洲精品少妇30P

  • <abbr id="o22kg"><abbr id="o22kg"></abbr></abbr>
    <abbr id="o22kg"></abbr>
      <sup id="o22kg"></sup>
      <dfn id="o22kg"></dfn>
      • facebook
      • linkedin
      • twitter
      • youtube

      How to maintain the sealing machine?

      1. Regularly clean the machine surface, bottom plate and lower die slide plate, groove, upper die inner pressure plate and positioning rod.

      2. Regularly clean the surface of the machine, the bottom plate and the groove of the lower slide plate, and the positioning rod of the upper mold inner pressure plate when the power is turned off and at room temperature.

      3. The transmission parts such as lower die slide plate, pressure rod bearing, eccentric wheel, guide column and guide rail are regularly added with butter to ensure the performance of the machine.

      4. The method of cleaning the tooth knife is to first plug the two drain holes of the lower die with cotton balls, pour boiling water into the groove of the lower die until it is full, then push the slide plate of the lower die into place, and press the upper die down. , press to the lowest point, let the tooth knife soak for a few minutes until it is clean, repeat several times.

      5. The lower die slide plate, the pressure rod bearing, the eccentric wheel and the guide column, the guide rail and other transmission parts are regularly greased. To ensure the performance of the machine.

      6. The cleaning method of the tooth knife is to first plug the two drain holes of the lower film with cotton balls, pour the boiling water into the groove of the lower mold until it is full, then push the slide plate of the lower mold into place, and press the upper mold down. , press to the lowest point, let the tooth knife soak for several minutes, repeat several times until it is clean.

      7. The automatic sealing machine should be placed in a ventilated and dry place. Generally, the room temperature can be maintained at about 25 °C.

      8. Dust should be removed regularly. When not in use, please unplug the power supply and cover it to keep the machine clean.

      9. If the working time is too long, the cooling switch should be turned on before shutting down.

      66666


      Post time: May-20-2022